The myStrom action you need to control a myStrom power switch. The myStrom action has the following attributes in addition to the base attributes, which are available on all actions (see also Actions):
| Device / Target | The device / target on which the action will be executed |
| Command | Command which is configured at the device / target |
Commands
You have to select the Action Type „MyStrom Action“. The following commands are at disposal:
| power.on | Turns on the MyStrom Power Switch. You should link it to the trigger «On». |
| power.off | Turns off the MyStrom Power Switch. You should link it to the trigger «Off». |
| state | Theh state command determins the state of the MyStrom Power Switch. It should be linked in any case to the trigger «state». |
