Devices that have a UDP interface can be controlled via the IRControl system. To do this, the device must be recorded as a device. You have to go in the setup program part on the devices and create a new device with the button. Press the button «Add manually» and select as Device Type «UDP Gateway».
No matching from Mac address to IP can be determined on devices with Android version 10 and higher and on iOS devices. In this case, an UDP Gateway must be registered with a fixed IP (you have to configure on the router).
Now you enter name and an ID for the device and configure the network access with Mac or IP and the port for controlling the device. You can read more about this in the chapter Network configuration.
Commands
Now the commands must be registered, which finally control the device. The exact sequences you take from the manual of your device or you have received it from its manufacturer.
Register the command with a unique ID and the UDP sequence. With the «Send» button the UDP sequence can be sent as a test to the device.
